A standard excavator that swings or travels slowly, whines under load or leaks oil from the travel reduction hub is usually telling you the JCB360 JS360 Travel Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this JCB360 JS360 Travel Gearbox as a ready-to-fit assembly, so the machine is back to full tractive effort and travel speed without a rebuild.
Item NO.:
JCB360 JS360Order(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockJCB360 JS360 Travel Gearbox is a complete reduction assembly for the travel circuit of standard excavators. The housing carries the ring gear and bearing bores in one rigid casting, the planet carriers run on caged bearings, and the output shaft is splined to match the original interface, so the unit drops into the existing mounting pattern without modification. Every assembly is checked for backlash, turning torque and seal integrity before it leaves the line.
| Part Number | JCB360 JS360 |
| Part Name | Travel Gearbox |
| Compatible Brand | JCB |
| Applicable Models | JCB360 JS360 |
| Application | Excavator travel gearbox in the final drive circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Delivers final drive torque to the track sprocket |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Matched Gear Set Ring gear and planet gears are lapped as a matched set, so tooth contact is full width from the first hour and the unit stays quiet under load. |
 | Factory Preload Bearings are shimmed and preloaded on the assembly line, which removes the end float that causes noise and premature wear in field rebuilds. |
 | Double-Lip Sealing A double-lip output seal plus O-ring joints keep abrasive dust out of the oil, the main reason reduction units fail early on demolition and quarry work. |
 | Bolt-On Fitment Mounting pattern, output spline and overall envelope follow the original unit, so the assembly installs with the existing bolts, hoses and guards. |
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: How do I confirm this JCB360 JS360 unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
A HD1430JCB330 Travel Motor that has covered high hours will usually show it through noise on travel, oil weeping past the seals and a drop in tractive effort and travel speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete HD1430JCB330 Travel Motor for standard excavators, tested for backlash and preload before packing.
View More
If a standard excavator has lost swing torque and swing speed, a worn JCB220 Swing Reduction Gearbox is the most common cause. The reduction gear set is the highest load point in the swing circuit, so any slack in the bearings shows up immediately as noise, heat and lost speed. RITO keeps this JCB220 Swing Reduction Gearbox in stock as a sealed, pre-assembled replacement.
View More
A JCB220 Travel Gearbox that has covered high hours will usually show it through noise on travel, oil weeping past the seals and a drop in tractive effort and travel speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete JCB220 Travel Gearbox for standard excavators, tested for backlash and preload before packing.
View More
A standard excavator that swings or travels slowly, whines under load or leaks oil from the swing reduction hub is usually telling you the JCB240 Swing Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this JCB240 Swing Gearbox as a ready-to-fit assembly, so the machine is back to full swing torque and swing speed without a rebuild.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your SY485C? A worn 13304040 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full SY485-series boom lift and clean, seal-tight operation.
View More
Losing hydraulic pressure or slow cycle times on your PC128UU-2? A worn 708-1L-00530 pump lets the HPV95 rotating group bypass internally, starving every circuit. RITO rebuilds this main pump to OEM clearances so your PC128UU-2 dig force and speed come back from the first hour.
View More
Low-grade rubber pin and bucket tooth lock easily age, crack and fall off under heavy digging impact. Unstable tooth fixation leads to bucket tooth shedding, reduced excavation efficiency and frequent replacement troubles. It causes construction delays and extra maintenance costs for wholesalers, agents and mine operation customers.
View More
Unstable hydraulic flow or weak digging force often signals wear inside the gear pump, directly reducing excavator productivity. PC35MR2-CLB gear pump is engineered for PC35MR-2 and PC35MR-3 models, delivering consistent hydraulic output and efficient power conversion for compact excavator operations in construction and rental fleets.
View MoreLeave A Message
Scan to wechat :
