A standard excavator that swings or travels slowly, whines under load or leaks oil from the swing reduction hub is usually telling you the JCB240 Swing Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this JCB240 Swing Gearbox as a ready-to-fit assembly, so the machine is back to full swing torque and swing speed without a rebuild.
Item NO.:
JCB240Order(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockJCB240 Swing Gearbox is a complete reduction assembly for the swing circuit of standard excavators. The housing carries the ring gear and bearing bores in one rigid casting, the planet carriers run on caged bearings, and the output shaft is splined to match the original interface, so the unit drops into the existing mounting pattern without modification. Every assembly is checked for backlash, turning torque and seal integrity before it leaves the line.
| Part Number | JCB240 |
| Part Name | Swing Gearbox |
| Compatible Brand | JCB |
| Applicable Models | JCB240 |
| Application | Excavator swing gearbox in the upper structure swing circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Turns motor torque into controlled swing rotation |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Rigid Cast Housing The ring gear and bearing bores sit in one casting, holding bore alignment under load so the gear mesh does not walk out of position. |
 | Tested Before Packing Each unit is checked for backlash, turning torque and seal integrity, then packed in a reinforced case to survive international freight. |
 | Complete Assembly Ring gear, planets, carriers, bearings, seals and output shaft arrive as one unit, so nothing is reused from a worn original. |
 | Matched Gear Set Ring gear and planet gears are lapped as a matched set, so tooth contact is full width from the first hour and the unit stays quiet under load. |
Q: How do I confirm this JCB240 unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
A standard excavator that swings or travels slowly, whines under load or leaks oil from the travel reduction hub is usually telling you the JCB360 JS360 Travel Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this JCB360 JS360 Travel Gearbox as a ready-to-fit assembly, so the machine is back to full tractive effort and travel speed without a rebuild.
View More
A HD1430JCB330 Travel Motor that has covered high hours will usually show it through noise on travel, oil weeping past the seals and a drop in tractive effort and travel speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete HD1430JCB330 Travel Motor for standard excavators, tested for backlash and preload before packing.
View More
If a standard excavator has lost swing torque and swing speed, a worn JCB220 Swing Reduction Gearbox is the most common cause. The reduction gear set is the highest load point in the swing circuit, so any slack in the bearings shows up immediately as noise, heat and lost speed. RITO keeps this JCB220 Swing Reduction Gearbox in stock as a sealed, pre-assembled replacement.
View More
A JCB220 Travel Gearbox that has covered high hours will usually show it through noise on travel, oil weeping past the seals and a drop in tractive effort and travel speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete JCB220 Travel Gearbox for standard excavators, tested for backlash and preload before packing.
View More
Sluggish swing acceleration and slow arm extensions on large earthmoving projects indicate your main pump assembly is losing steam. When internal swashplates score, the machine's dual-circuit pressure balance drops, dragging down tracking speed and stalling your projects. Protect your medium-to-large fleet from costly unexpected downtime.
View More
Hydraulic instability in ZX210LCN-3 excavators often shows up as weak breakout force, delayed actuator response, and inconsistent multi-function coordination under load. The 9262319 hydraulic piston pump assembly is designed to restore stable pressure delivery, helping the machine recover smooth and controlled hydraulic behavior during excavation, lifting, and continuous earthmoving operations.
View More
Operating a mid-sized excavator that constantly drifts to one side during straight travel turns simple ditch digging into a frustrating, slow project. When internal piston wear robs your 9180429 travel motor assembly of its hydraulic pressure, tracking power drops, and the machine struggles to climb standard slopes. Ignoring this drop in undercarriage traction can leave your excavator stuck in soft clay, stalling active schedules and increasing field troubleshooting costs.
View More
Losing cycle speed, climbing oil temperature or unstable main pressure on a 28-33 ton class excavator? A worn K3V140DT / K5V140DT Excavator Hydraulic Main Pump leaks internally past its rotating group, so the machine must work harder for the same output. RITO supplies this K3V140DT / K5V140DT Excavator Hydraulic Main Pump (nominal 140 cc/rev), covering the K3V140DT / K5V140DT designations used in service to help restore stable flow, full digging force and normal oil temperature.
View MoreLeave A Message
Scan to wechat :
