excavator spare parts

220 results found for "excavator spare parts"

A total of 28 pages

RITO R150-9 Swing Reduction Gearbox Excavator Spare Parts Swing Reduction Gearbox Assembly

A standard excavator that swings or travels slowly, whines under load or leaks oil from the swing reduction hub is usually telling you the R150-9 Swing Reduction Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this R150-9 Swing Reduction Gearbox as a ready-to-fit assembly, so the machine is back to full swing torque and swing speed without a rebuild.

Hot Tags : hydraulic swing reduction gearbox R150-9 swing reduction gearbox Swing Reduction Gearbox Assembly excavator swing reduction gearbox Hyundai swing reduction gearbox excavator spare parts
View More
RITO R140-7 R160-7 Travel Gearbox Excavator Spare Parts Travel Gearbox Assembly

A R140-7R160-7 Travel Gearbox that has covered high hours will usually show it through noise on travel, oil weeping past the seals and a drop in tractive effort and travel speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete R140-7R160-7 Travel Gearbox for standard excavators, tested for backlash and preload before packing.

Hot Tags : hydraulic travel gearbox R140-7R160-7 travel gearbox Travel Gearbox Assembly excavator travel gearbox Hyundai travel gearbox
View More
RITO R130-7 R140-7 Swing Gearbox Excavator Spare Parts Swing Gearbox Assembly

If a standard excavator has lost swing torque and swing speed, a worn R130-7 R140-7 Swing Gearbox is the most common cause. The reduction gear set is the highest load point in the swing circuit, so any slack in the bearings shows up immediately as noise, heat and lost speed. RITO keeps this R130-7 R140-7 Swing Gearbox in stock as a sealed, pre-assembled replacement.

Hot Tags : hydraulic swing gearbox R130-7 R140-7 swing gearbox Swing Gearbox Assembly excavator swing gearbox Hyundai swing gearbox
View More
RITO PC1250-8 Swing Gearbox Excavator Spare Parts Swing Gearbox Assembly

Rising oil temperature, metal particles in the swing housing oil or a machine that creeps and then stops are classic symptoms of a tired PC1250-8 Swing Gearbox. Once the bearing preload is lost the gear mesh runs out of alignment and wear accelerates quickly. RITO supplies this PC1250-8 Swing Gearbox as a complete unit for standard excavators, returning swing torque and swing speed to specification.

Hot Tags : PC1250-8 swing gearbox Komatsu swing gearbox
View More
RITO PC1250-7 Swing Gearbox Excavator Spare Parts Swing Gearbox Assembly

When the swing drive on a standard excavator loses power, runs hot or starts to slip, the PC1250-7 Swing Gearbox is the first place to look. Internal wear between the planet carriers and the ring gear turns motor torque into heat instead of motion. RITO offers the PC1250-7 Swing Gearbox complete with the gear set and bearings already shimmed, which restores swing torque and swing speed and removes the guesswork of a field rebuild.

Hot Tags : PC1250-7 swing gearbox
View More
RITO PC1250-7 PC1250-8 Travel Gearbox Excavator Spare Parts Travel Gearbox Assembly

A standard excavator that swings or travels slowly, whines under load or leaks oil from the travel reduction hub is usually telling you the PC1250-7 PC1250-8 Travel Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this PC1250-7 PC1250-8 Travel Gearbox as a ready-to-fit assembly, so the machine is back to full tractive effort and travel speed without a rebuild.

Hot Tags : PC1250-7 PC1250-8 travel gearbox Komatsu travel gearbox
View More
RITO PC400-7 Travel Reduction Gearbox Excavator Spare Parts Travel Reduction Gearbox Assembly

A PC400-7 Travel Reduction Gearbox that has covered high hours will usually show it through noise on travel, oil weeping past the seals and a drop in tractive effort and travel speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete PC400-7 Travel Reduction Gearbox for standard excavators, tested for backlash and preload before packing.

Hot Tags : hydraulic travel reduction gearbox PC400-7 travel reduction gearbox Travel Reduction Gearbox Assembly excavator travel reduction gearbox Komatsu travel reduction gearbox
View More
RITO PC400-7 PC450-7 Swing Gearbox Excavator Spare Parts Swing Gearbox Assembly

If a standard excavator has lost swing torque and swing speed, a worn PC400-7 PC450-7 Swing Gearbox is the most common cause. The reduction gear set is the highest load point in the swing circuit, so any slack in the bearings shows up immediately as noise, heat and lost speed. RITO keeps this PC400-7 PC450-7 Swing Gearbox in stock as a sealed, pre-assembled replacement.

Hot Tags : PC400-7 PC450-7 swing gearbox
View More

1 12 13 14 15 16 ... 28