excavator spare parts

220 results found for "excavator spare parts"

A total of 28 pages

RITO CAT 307E 307E2 308E2 Swing Motor Excavator Spare Parts Swing Motor Assembly

If a standard excavator has lost swing torque and swing speed, a worn CAT 307E 307E2 308E2 Swing Motor is the most common cause. The reduction gear set is the highest load point in the swing circuit, so any slack in the bearings shows up immediately as noise, heat and lost speed. RITO keeps this CAT 307E 307E2 308E2 Swing Motor in stock as a sealed, pre-assembled replacement.

Hot Tags : CAT 307E 307E2 308E2 swing motor Swing Motor Assembly excavator swing motor Caterpillar swing motor excavator spare parts hydraulic swing motor
View More
RITO CASE CX800 Swing Reduction Gearbox Excavator Spare Parts Swing Reduction Gearbox Assembly

Rising oil temperature, metal particles in the swing housing oil or a machine that creeps and then stops are classic symptoms of a tired CASE CX800 Swing Reduction Gearbox. Once the bearing preload is lost the gear mesh runs out of alignment and wear accelerates quickly. RITO supplies this CASE CX800 Swing Reduction Gearbox as a complete unit for standard excavators, returning swing torque and swing speed to specification.

Hot Tags : CASE CX800 swing reduction gearbox Swing Reduction Gearbox Assembly excavator swing reduction gearbox Case swing reduction gearbox hydraulic swing reduction gearbox
View More
RITO CASE CX330 Swing Reduction Gearbox Excavator Spare Parts Swing Reduction Gearbox Assembly

When the swing drive on a standard excavator loses power, runs hot or starts to slip, the CASE CX330 Swing Reduction Gearbox is the first place to look. Internal wear between the planet carriers and the ring gear turns motor torque into heat instead of motion. RITO offers the CASE CX330 Swing Reduction Gearbox complete with the gear set and bearings already shimmed, which restores swing torque and swing speed and removes the guesswork of a field rebuild.

Hot Tags : CASE CX330 swing reduction gearbox
View More
RITO 602-5995 CAT 350 Swing Reduction Gearbox Excavator Spare Parts Swing Reduction Gearbox Assembly

A standard excavator that swings or travels slowly, whines under load or leaks oil from the swing reduction hub is usually telling you the CAT 350 Swing Reduction Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this CAT 350 Swing Reduction Gearbox as a ready-to-fit assembly, so the machine is back to full swing torque and swing speed without a rebuild.

Hot Tags : CAT 350 swing reduction gearbox Caterpillar swing reduction gearbox
View More

1 26 27 28