A standard excavator that swings or travels slowly, whines under load or leaks oil from the swing reduction hub is usually telling you the R150-9 Swing Reduction Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this R150-9 Swing Reduction Gearbox as a ready-to-fit assembly, so the machine is back to full swing torque and swing speed without a rebuild.
Item NO.:
R150-9Order(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockR150-9 Swing Reduction Gearbox is a complete reduction assembly for the swing circuit of standard excavators. The housing carries the ring gear and bearing bores in one rigid casting, the planet carriers run on caged bearings, and the output shaft is splined to match the original interface, so the unit drops into the existing mounting pattern without modification. Every assembly is checked for backlash, turning torque and seal integrity before it leaves the line.
| Part Number | R150-9 |
| Part Name | Swing Reduction Gearbox |
| Compatible Brand | Hyundai |
| Applicable Models | R150-9 |
| Application | Excavator swing reduction unit in the upper structure swing circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Turns motor torque into controlled swing rotation |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Bolt-On Fitment Mounting pattern, output spline and overall envelope follow the original unit, so the assembly installs with the existing bolts, hoses and guards. |
 | Hardened Internals Gears and shafts are case hardened and ground, giving a tooth surface that resists pitting under the shock loads typical of excavator travel and swing duty. |
 | Rigid Cast Housing The ring gear and bearing bores sit in one casting, holding bore alignment under load so the gear mesh does not walk out of position. |
 | Tested Before Packing Each unit is checked for backlash, turning torque and seal integrity, then packed in a reinforced case to survive international freight. |
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: How do I confirm this R150-9 unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
This RITO Excavator Drive Shaft PTO Shaft R300LC-9SZ R300LC-9S R320LC-9S R330LC-9S is a key transmission component for Hyundai excavators, responsible for transferring engine power to the hydraulic pump. It ensures stable torque transmission, smooth power delivery, and reliable operation in demanding construction environments.
View More
This RITO 31N8-27210 Right Joystick Control Handle Assembly is a key control component for Hyundai R320LC-7A, R330LC-7A, and R300LC-7 excavators, designed to transmit precise pilot control signals to the hydraulic system. It ensures smooth operation, accurate response, and stable control of the arm, bucket, and travel functions in construction environments.
View More
This RITO XJBN-00649 Hydraulic Spool Valve is a critical internal component for the main control valve of Hyundai R320LC-7A and R330LC-7A excavators, designed to precisely regulate hydraulic oil flow and direction within the system. It ensures accurate control response, smooth operation, and stable performance in construction environments.
View More
This RITO XJBN-00650 Hydraulic Spool Valve is a critical internal component for the main control valve of Hyundai R320LC-7A and R330LC-7A excavators, designed to precisely regulate hydraulic oil flow and direction within the system. It ensures accurate control response, smooth operation, and stable performance in demanding construction environments.
View More
This RITO R210-7YLF Hydraulic Main Relief Valve is a critical safety component for Hyundai R210-7, R215-7, and R220-7 excavators, designed to regulate and limit maximum hydraulic pressure within the system. It protects key components from overload, ensuring stable pressure control, smooth operation, and reliable performance in construction environments.
View More
This RITO 31N6-17740 Negacon Valve Assembly is a key hydraulic control component for Hyundai R210-7, R215-7, R220-7, and R320LC-7A excavators, designed to regulate negative flow signals and coordinate pump output with system demand. It ensures smooth multi-function operation, optimized power distribution, and improved fuel efficiency in construction environments.
View More
Excessive axial play and metal-on-metal friction in excavator joints lead to catastrophic pin wear and structural misalignment. Standard washers often fail under the intense vibration of mining sites. The XKAQ-00214 eliminates these gaps, preventing the costly bore repairs that paralyze your R210LC-7 fleet.
View More
Excavator planetary failure forces costly teardowns. XKAQ-00400 eliminates loose pocket wear & cracked bridges seen in weak carriers. Direct-fit for Hyundai R330-9 final drives. Reduce rework claims now.
View MoreLeave A Message
Scan to wechat :
