When the swing drive on a standard excavator loses power, runs hot or starts to slip, the SY485 Swing Gearbox is the first place to look. Internal wear between the planet carriers and the ring gear turns motor torque into heat instead of motion. RITO offers the SY485 Swing Gearbox complete with the gear set and bearings already shimmed, which restores swing torque and swing speed and removes the guesswork of a field rebuild.
Item NO.:
SY485Order(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockThis SY485 Swing Gearbox is built as a direct replacement for the original swing reduction unit on standard machines. The gear set is machined from hardened alloy steel and lapped in matched sets, the bearings are preloaded in the factory, and the sealing arrangement uses a double-lip shaft seal to keep dust out of the oil. The result is a unit that installs on the original bolt pattern and returns swing torque and swing speed to the level the machine had when new.
| Part Number | SY485 |
| Part Name | Swing Gearbox |
| Compatible Brand | Sany |
| Applicable Models | SY485 |
| Application | Excavator swing gearbox in the upper structure swing circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Turns motor torque into controlled swing rotation |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Complete Assembly Ring gear, planets, carriers, bearings, seals and output shaft arrive as one unit, so nothing is reused from a worn original. |
 | Matched Gear Set Ring gear and planet gears are lapped as a matched set, so tooth contact is full width from the first hour and the unit stays quiet under load. |
 | Factory Preload Bearings are shimmed and preloaded on the assembly line, which removes the end float that causes noise and premature wear in field rebuilds. |
 | Double-Lip Sealing A double-lip output seal plus O-ring joints keep abrasive dust out of the oil, the main reason reduction units fail early on demolition and quarry work. |
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: How do I confirm this SY485 unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
Bucket crowd force weak or cylinder rod leaking on your SY485C? A worn 60248642 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY485-series bucket crowd force and clean seal operation.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your SY485C? A worn 13304040 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full SY485-series boom lift and clean, seal-tight operation.
View More
Arm crowd slow or rod seal weeping on your SY485C? A worn 60248643 arm cylinder loses piston seal integrity and drops arm crowing force below what the machine needs for hard digging, while a scored rod seal leaks hydraulic oil across the cylinder head. RITO supplies this heavy-duty replacement arm cylinder to restore full SY485-series arm crowd force and clean, seal-tight operation.
View More
Arm crowd slow or rod seal weeping on your SY335C? A worn 60011436 arm cylinder loses piston seal integrity and drops arm crowing force below what the machine needs for hard digging, while a scored rod seal leaks hydraulic oil across the cylinder head. RITO supplies this heavy-duty replacement arm cylinder to restore full SY305-series arm crowd force and clean, seal-tight operation.
View More
Bucket crowd force weak or cylinder rod leaking on your SY335C? A worn 60011434 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY305-series bucket crowd force and clean seal operation.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your SY335C? A worn 60011435 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full SY305-series boom lift and clean, seal-tight operation.
View More
Bucket crowd force weak or cylinder rod leaking on your SY235C? A worn 60027481 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY235C-series bucket crowd force and clean seal operation.
View More
Bucket crowd force weak or cylinder rod leaking on your SY215C? A worn 11350784 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY215C-series bucket crowd force and clean seal operation.
View MoreLeave A Message
Scan to wechat :
