Boom lift force dropping or hydraulic oil weeping from the rod on your SY335C? A worn 60011435 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full SY305-series boom lift and clean, seal-tight operation.
Item NO.:
6001143560011435 Hydraulic Boom Cylinder Assembly for SANY SY305C, SY335C, SY365C excavators. Heavy-duty double-acting boom cylinder with chrome-plated precision rod and a honed bore produced to OEM specification. Chrome layer thickness, honing surface finish and the multi-layer piston seal assembly are matched to the SY305-class lifting duty cycle so the new cylinder delivers original boom holding force and cycle time from installation.
| Part Number | 60011435 |
|---|---|
| Part Name | Hydraulic Boom Cylinder Assembly |
| Compatible Brand | SANY |
| Applicable Models | SY305C, SY335C, SY365C Excavator |
| Application | Main boom lift hydraulic cylinder for SANY SY305-class excavators |
| Material | High-strength steel body, chrome-plated precision rod |
| Product Color | Yellow or industrial finish |
| Working Temperature | -25°C~+80°C |
| Key Function | Provides hydraulic boom lifting and holding force for SY305-series excavator work cycles |
| Condition | 100% New Aftermarket OEM Quality |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
Rod chrome layer thickness and adhesion matched to SY305-series OEM specification, providing the hardness and corrosion resistance that determines boom cylinder seal service life.
Bore honed to OEM surface finish and dimensional tolerance for correct piston seal contact and low internal bypass at full SY305 working pressure.
60011435 covers the boom cylinder specification across the listed SANY SY305-class models, keeping fleets on one interchangeable replacement.
Rod and piston seal assembly rated for SY305 maximum boom pressure, with buffer seals that protect the primary rod seal from pressure spikes during heavy lifts.
FAQ
Q: How do I tell if the 60011435 boom cylinder has internal bypass or rod seal leakage?
A: External leakage is visible at the rod seal. Internal bypass causes slow boom drift when held stationary under load without visible external oil. Hold the boom at mid-stroke and watch for downward drift over 60 seconds.
Q: Can I replace only the seal kit in the 60011435 cylinder?
A: If the rod chrome is undamaged and the bore is within specification, a seal kit repair is economical. Replace the full cylinder if the rod shows pitting, score marks or chrome delamination that would cut the new seals immediately.
Q: What bleeding procedure is needed after fitting 60011435?
A: Cycle the boom slowly through full extension and retraction five times at low engine speed before applying full load. This purges air and seats the seal assembly before high-pressure operation.
Q: How to confirm 60011435 is correct for my SY305?
A: Match the existing cylinder part number against 60011435 and confirm the machine model is one of: SY305C, SY335C, SY365C. Provide the machine serial number for cross-reference confirmation.
Q: What quality options are available?
A: We provide original, OEM and high-quality aftermarket versions with stable supply capability.
Q:Why Choose RITO?
A:Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
Bucket crowd force weak or cylinder rod leaking on your SY485C? A worn 60248642 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY485-series bucket crowd force and clean seal operation.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your SY485C? A worn 13304040 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full SY485-series boom lift and clean, seal-tight operation.
View More
Arm crowd slow or rod seal weeping on your SY485C? A worn 60248643 arm cylinder loses piston seal integrity and drops arm crowing force below what the machine needs for hard digging, while a scored rod seal leaks hydraulic oil across the cylinder head. RITO supplies this heavy-duty replacement arm cylinder to restore full SY485-series arm crowd force and clean, seal-tight operation.
View More
Arm crowd slow or rod seal weeping on your SY335C? A worn 60011436 arm cylinder loses piston seal integrity and drops arm crowing force below what the machine needs for hard digging, while a scored rod seal leaks hydraulic oil across the cylinder head. RITO supplies this heavy-duty replacement arm cylinder to restore full SY305-series arm crowd force and clean, seal-tight operation.
View More
Bucket crowd force weak or cylinder rod leaking on your SY335C? A worn 60011434 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY305-series bucket crowd force and clean seal operation.
View More
Bucket crowd force weak or cylinder rod leaking on your SY235C? A worn 60027481 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY235C-series bucket crowd force and clean seal operation.
View More
Bucket crowd force weak or cylinder rod leaking on your SY215C? A worn 11350784 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full SY215C-series bucket crowd force and clean seal operation.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your SY235C? A worn 60027482 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full SY235C-series boom lift and clean, seal-tight operation.
View MoreLeave A Message
Scan to wechat :
