Gearbox Assembly

198 results found for "Gearbox Assembly"

A total of 25 pages

RITO ZX330-3 Travel Gearbox Excavator Spare Parts Travel Gearbox Assembly

Rising oil temperature, metal particles in the travel housing oil or a machine that creeps and then stops are classic symptoms of a tired ZX330-3 Travel Gearbox. Once the bearing preload is lost the gear mesh runs out of alignment and wear accelerates quickly. RITO supplies this ZX330-3 Travel Gearbox as a complete unit for standard excavators, returning tractive effort and travel speed to specification.

Hot Tags : hydraulic travel gearbox ZX330-3 travel gearbox Travel Gearbox Assembly excavator travel gearbox Hitachi travel gearbox excavator spare parts
View More
RITO ZX330-3 Swing Reduction Gearbox Excavator Spare Parts Swing Reduction Gearbox Assembly

A standard excavator that swings or travels slowly, whines under load or leaks oil from the swing reduction hub is usually telling you the ZX330-3 Swing Reduction Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this ZX330-3 Swing Reduction Gearbox as a ready-to-fit assembly, so the machine is back to full swing torque and swing speed without a rebuild.

Hot Tags : hydraulic swing reduction gearbox ZX330-3 swing reduction gearbox Swing Reduction Gearbox Assembly excavator swing reduction gearbox Hitachi swing reduction gearbox
View More
RITO ZX330-3 ZX330-5G Swing Gearbox Excavator Spare Parts Swing Gearbox Assembly

A ZX330-3ZX330-5G Swing Gearbox that has covered high hours will usually show it through noise on swing, oil weeping past the seals and a drop in swing torque and swing speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete ZX330-3ZX330-5G Swing Gearbox for standard excavators, tested for backlash and preload before packing.

Hot Tags : hydraulic swing gearbox ZX330-3ZX330-5G swing gearbox Swing Gearbox Assembly excavator swing gearbox Hitachi swing gearbox
View More
RITO ZX330-1 Travel Reduction Gearbox Direct Injection Excavator Spare Parts Travel Reduction Gearbox Assembly

Rising oil temperature, metal particles in the travel housing oil or a machine that creeps and then stops are classic symptoms of a tired ZX330-1 Travel Reduction Gearbox. Once the bearing preload is lost the gear mesh runs out of alignment and wear accelerates quickly. RITO supplies this ZX330-1 Travel Reduction Gearbox as a complete unit for standard excavators, returning tractive effort and travel speed to specification.

Hot Tags : hydraulic travel reduction gearbox ZX330-1 travel reduction gearbox Travel Reduction Gearbox Assembly excavator travel reduction gearbox Hitachi travel reduction gearbox
View More
RITO ZX330-1 Swing Gearbox Excavator Spare Parts Swing Gearbox Assembly

When the swing drive on a standard excavator loses power, runs hot or starts to slip, the ZX330-1 Swing Gearbox is the first place to look. Internal wear between the planet carriers and the ring gear turns motor torque into heat instead of motion. RITO offers the ZX330-1 Swing Gearbox complete with the gear set and bearings already shimmed, which restores swing torque and swing speed and removes the guesswork of a field rebuild.

Hot Tags : ZX330-1 swing gearbox
View More
RITO ZX270-3 ZX280 Travel Gearbox Excavator Spare Parts Travel Gearbox Assembly

A standard excavator that swings or travels slowly, whines under load or leaks oil from the travel reduction hub is usually telling you the ZX270-3 ZX280 Travel Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this ZX270-3 ZX280 Travel Gearbox as a ready-to-fit assembly, so the machine is back to full tractive effort and travel speed without a rebuild.

Hot Tags : ZX270-3 ZX280 travel gearbox
View More
RITO ZX240-3 Travel Gearbox Excavator Spare Parts Travel Gearbox Assembly

A ZX240-3 Travel Gearbox that has covered high hours will usually show it through noise on travel, oil weeping past the seals and a drop in tractive effort and travel speed. Replacing the whole assembly is faster and more predictable than replacing gears one by one. RITO supplies the complete ZX240-3 Travel Gearbox for standard excavators, tested for backlash and preload before packing.

Hot Tags : ZX240-3 travel gearbox
View More
RITO ZX240-3 Swing Reduction Gearbox Round Flange Type Excavator Spare Parts Swing Reduction Gearbox Assembly

If a standard excavator has lost swing torque and swing speed, a worn ZX240-3 Swing Reduction Gearbox is the most common cause. The reduction gear set is the highest load point in the swing circuit, so any slack in the bearings shows up immediately as noise, heat and lost speed. RITO keeps this ZX240-3 Swing Reduction Gearbox in stock as a sealed, pre-assembled replacement.

Hot Tags : ZX240-3 swing reduction gearbox
View More

1 4 5 6 7 8 ... 25