A standard excavator that swings or travels slowly, whines under load or leaks oil from the swing reduction hub is usually telling you the ZX330-3 Swing Reduction Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this ZX330-3 Swing Reduction Gearbox as a ready-to-fit assembly, so the machine is back to full swing torque and swing speed without a rebuild.
Item NO.:
ZX330-3Order(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockZX330-3 Swing Reduction Gearbox is a complete reduction assembly for the swing circuit of standard excavators. The housing carries the ring gear and bearing bores in one rigid casting, the planet carriers run on caged bearings, and the output shaft is splined to match the original interface, so the unit drops into the existing mounting pattern without modification. Every assembly is checked for backlash, turning torque and seal integrity before it leaves the line.
| Part Number | ZX330-3 |
| Part Name | Swing Reduction Gearbox |
| Compatible Brand | Hitachi |
| Applicable Models | ZX330-3 |
| Application | Excavator swing reduction unit in the upper structure swing circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Turns motor torque into controlled swing rotation |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Double-Lip Sealing A double-lip output seal plus O-ring joints keep abrasive dust out of the oil, the main reason reduction units fail early on demolition and quarry work. |
 | Bolt-On Fitment Mounting pattern, output spline and overall envelope follow the original unit, so the assembly installs with the existing bolts, hoses and guards. |
 | Hardened Internals Gears and shafts are case hardened and ground, giving a tooth surface that resists pitting under the shock loads typical of excavator travel and swing duty. |
 | Rigid Cast Housing The ring gear and bearing bores sit in one casting, holding bore alignment under load so the gear mesh does not walk out of position. |
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: How do I confirm this ZX330-3 unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
Optimize your Hitachi excavator's performance with this premium hydraulic joystick pilot control valve, precision-engineered for ZX350, ZX330, and ZX130LCN-3 models. It delivers smooth, accurate handling and rugged durability for demanding job sites.
View More
This RITO 9295140 4663831 Hydraulic Pump is a core power component for Hitachi ZAXIS75US-3 and ZAXIS85USB-3 excavators, responsible for converting mechanical energy into stable hydraulic pressure to drive the arm, bucket, and travel systems. It ensures smooth operation, consistent flow output, and reliable performance under demanding construction and mining conditions.
View More
This RITO 9285566 9285685 9290597 9290598 Hydraulic Pump is a core component for Hitachi ZAXIS120-3 excavators, responsible for converting mechanical energy into stable hydraulic pressure to power the arm, bucket, and travel systems. It ensures smooth operation, precise flow control, and reliable performance in construction and mining environments.
View More
This RITO 9262319 9262320 Hydraulic Pump is a core component for Hitachi ZAXIS200-3 excavators, responsible for converting mechanical energy into stable hydraulic pressure to power the arm, bucket, and travel systems. It ensures smooth operation, precise flow control, and reliable performance in construction and mining environments.
View More
This RITO 9257345 9257346 Hydraulic Pump is a core component for Hitachi ZAXIS270-3 excavators, responsible for converting mechanical energy into stable hydraulic pressure to drive the arm, bucket, and travel systems. It ensures smooth operation, precise flow control, and reliable performance in construction and mining environments.
View More
This RITO 9254122 4635645 9254123 0005271 Hydraulic Pump is a heavy-duty core component for Hitachi ZAXIS650LC-3 excavators, designed to convert mechanical energy into stable, high-pressure hydraulic output for demanding arm, bucket, and travel operations. It ensures smooth power transmission, precise flow regulation, and reliable performance in extreme mining and large-scale construction environments.
View More
This RITO 9197075 0003954 Hydraulic Pump is a heavy-duty core component for Hitachi ZAXIS600 excavators, engineered to convert mechanical energy into stable, high-pressure hydraulic output for arm, bucket, and travel operations. It ensures smooth power transmission, precise flow control, and reliable performance in demanding mining and large-scale construction environments.
View More
This RITO 9195239 9195237 Hydraulic Pump is a core component for Hitachi ZAXIS270 excavators, designed to convert mechanical energy into stable hydraulic pressure to power the arm, bucket, and travel systems. It ensures smooth operation, precise flow control, and reliable performance in construction and medium to heavy-duty working environments.
View MoreLeave A Message
Scan to wechat :
