A standard excavator that swings or travels slowly, whines under load or leaks oil from the travel reduction hub is usually telling you the SK200-6E Travel Gearbox has reached the end of its service life. Worn planet gears, a scored ring gear and a failed bearing set all waste torque before it reaches the track or the upper structure. RITO supplies this SK200-6E Travel Gearbox as a ready-to-fit assembly, so the machine is back to full tractive effort and travel speed without a rebuild.
Item NO.:
SK200-6EOrder(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockSK200-6E Travel Gearbox is a complete reduction assembly for the travel circuit of standard excavators. The housing carries the ring gear and bearing bores in one rigid casting, the planet carriers run on caged bearings, and the output shaft is splined to match the original interface, so the unit drops into the existing mounting pattern without modification. Every assembly is checked for backlash, turning torque and seal integrity before it leaves the line.
| Part Number | SK200-6E |
| Part Name | Travel Gearbox |
| Compatible Brand | Kobelco |
| Applicable Models | SK200-6E |
| Application | Excavator travel gearbox in the final drive circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Delivers final drive torque to the track sprocket |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Hardened Internals Gears and shafts are case hardened and ground, giving a tooth surface that resists pitting under the shock loads typical of excavator travel and swing duty. |
 | Rigid Cast Housing The ring gear and bearing bores sit in one casting, holding bore alignment under load so the gear mesh does not walk out of position. |
 | Tested Before Packing Each unit is checked for backlash, turning torque and seal integrity, then packed in a reinforced case to survive international freight. |
 | Complete Assembly Ring gear, planets, carriers, bearings, seals and output shaft arrive as one unit, so nothing is reused from a worn original. |
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: How do I confirm this SK200-6E unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
Wholesale/agent/mining clients face frequent downtime, high maintenance costs, and poor part compatibility in excavator hydraulic systems. Vibration, misalignment, and harsh mining environments destroy standard couplings, delaying projects and eroding profits. RITO YN15V00017S010 flexible coupling absorbs shock, compensates misalignment, and fits major excavator models—ideal for bulk/agency orders.
View More
Frequent downtime, poor part compatibility, and inconsistent quality plague excavator fleet operators, wholesalers, and mine clients, raising maintenance costs and delaying projects. RITO Drive Shaft Pump Shaft YN15V00017S009 addresses these issues with forged steel construction, precise dimensional accuracy, and strict quality control, ensuring reliable power transmission in harsh mining and construction environments.
View More
YN53D00008S009 sun gear shaft solves core pain points with OEM-grade precision, perfect fit for Kobelco excavators, cutting maintenance costs & downtime risk.
View More
Uneven torque transmission or premature wear in excavator final drives can reduce machine mobility and increase downtime.
View More
Unplanned downtime due to swing gearbox failure can halt entire mining operations. The YN32W01058F1 Planet Carrier is the ultimate solution for worn or fractured assemblies. Specifically engineered for SK200-8 and SK210-8 excavators, it restores precise rotation and torque efficiency instantly.
View More
Continuous swing impact and uneven rotational loading can gradually damage the internal carrier system of the reduction gearbox, leading to unstable upper-structure rotation and abnormal drivetrain stress. YN32W01009P1 planet carrier assembly is engineered for Kobelco SK200-8, SK210-8, and SK250-8 excavators, supporting balanced torque transfer inside the swing reduction mechanism during demanding excavation operations.
View More
Excavator track adjuster failures often cause costly project downtime. Weak grease valves leak under extreme high pressure, risking master track links throwing off or breaking chains during mining. Avoid sub-par aftermarket parts that ruin heavy machinery and disrupt fleet schedules. 2444P803 solves this entirely.
View More
Stripped reduction gears and worn motor shafts paralyze excavator rotational control, freezing on-site productivity. Cheap aftermarket assemblies lack the muscular torque retention needed for heavy sloping work, causing violent upper-frame shaking, rapid seal blowouts, and severe revenue loss.
View MoreLeave A Message
Scan to wechat :
