When the travel drive on a standard excavator loses power, runs hot or starts to slip, the R480-9 R520-9 R485VS HX480 HX520 Travel Gearbox is the first place to look. Internal wear between the planet carriers and the ring gear turns motor torque into heat instead of motion. RITO offers the R480-9 R520-9 R485VS HX480 HX520 Travel Gearbox complete with the gear set and bearings already shimmed, which restores tractive effort and travel speed and removes the guesswork of a field rebuild.
Item NO.:
R480-9 R520-9 R485VSOrder(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockThis R480-9 R520-9 R485VS HX480 HX520 Travel Gearbox is built as a direct replacement for the original travel reduction unit on standard machines. The gear set is machined from hardened alloy steel and lapped in matched sets, the bearings are preloaded in the factory, and the sealing arrangement uses a double-lip shaft seal to keep dust out of the oil. The result is a unit that installs on the original bolt pattern and returns tractive effort and travel speed to the level the machine had when new.
| Part Number | R480-9 R520-9 R485VS HX480 HX520 |
| Part Name | Travel Gearbox |
| Compatible Brand | Hyundai |
| Applicable Models | R480-9 R520-9 R485VS HX480 HX520 |
| Application | Excavator travel gearbox in the final drive circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Delivers final drive torque to the track sprocket |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Matched Gear Set Ring gear and planet gears are lapped as a matched set, so tooth contact is full width from the first hour and the unit stays quiet under load. |
 | Factory Preload Bearings are shimmed and preloaded on the assembly line, which removes the end float that causes noise and premature wear in field rebuilds. |
 | Double-Lip Sealing A double-lip output seal plus O-ring joints keep abrasive dust out of the oil, the main reason reduction units fail early on demolition and quarry work. |
 | Bolt-On Fitment Mounting pattern, output spline and overall envelope follow the original unit, so the assembly installs with the existing bolts, hoses and guards. |
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: How do I confirm this R480-9 R520-9 R485VS HX480 HX520 unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
This RITO Excavator Drive Shaft PTO Shaft R300LC-9SZ R300LC-9S R320LC-9S R330LC-9S is a key transmission component for Hyundai excavators, responsible for transferring engine power to the hydraulic pump. It ensures stable torque transmission, smooth power delivery, and reliable operation in demanding construction environments.
View More
This RITO 31N8-27210 Right Joystick Control Handle Assembly is a key control component for Hyundai R320LC-7A, R330LC-7A, and R300LC-7 excavators, designed to transmit precise pilot control signals to the hydraulic system. It ensures smooth operation, accurate response, and stable control of the arm, bucket, and travel functions in construction environments.
View More
This RITO XJBN-00649 Hydraulic Spool Valve is a critical internal component for the main control valve of Hyundai R320LC-7A and R330LC-7A excavators, designed to precisely regulate hydraulic oil flow and direction within the system. It ensures accurate control response, smooth operation, and stable performance in construction environments.
View More
This RITO XJBN-00650 Hydraulic Spool Valve is a critical internal component for the main control valve of Hyundai R320LC-7A and R330LC-7A excavators, designed to precisely regulate hydraulic oil flow and direction within the system. It ensures accurate control response, smooth operation, and stable performance in demanding construction environments.
View More
This RITO R210-7YLF Hydraulic Main Relief Valve is a critical safety component for Hyundai R210-7, R215-7, and R220-7 excavators, designed to regulate and limit maximum hydraulic pressure within the system. It protects key components from overload, ensuring stable pressure control, smooth operation, and reliable performance in construction environments.
View More
This RITO 31N6-17740 Negacon Valve Assembly is a key hydraulic control component for Hyundai R210-7, R215-7, R220-7, and R320LC-7A excavators, designed to regulate negative flow signals and coordinate pump output with system demand. It ensures smooth multi-function operation, optimized power distribution, and improved fuel efficiency in construction environments.
View More
Excessive axial play and metal-on-metal friction in excavator joints lead to catastrophic pin wear and structural misalignment. Standard washers often fail under the intense vibration of mining sites. The XKAQ-00214 eliminates these gaps, preventing the costly bore repairs that paralyze your R210LC-7 fleet.
View More
Excavator planetary failure forces costly teardowns. XKAQ-00400 eliminates loose pocket wear & cracked bridges seen in weak carriers. Direct-fit for Hyundai R330-9 final drives. Reduce rework claims now.
View MoreLeave A Message
Scan to wechat :
