If a standard excavator has lost swing torque and swing speed, a worn CAT M315D Swing Gearbox is the most common cause. The reduction gear set is the highest load point in the swing circuit, so any slack in the bearings shows up immediately as noise, heat and lost speed. RITO keeps this CAT M315D Swing Gearbox in stock as a sealed, pre-assembled replacement.
Item NO.:
CAT M315DOrder(MOQ):
1pcsPayment:
T/T, WESTERN UNION, CHINESE BANK,PAYPALProduct Origin:
JAPANShipping Port:
Huangpu,GuangzhouLead Time：
In StockThe CAT M315D Swing Gearbox is designed for the load profile of standard excavators working in construction and quarry duty. Torque passes from the motor spline through two or three planetary stages into the output shaft, and each stage is shimmed to a controlled end float so the gear mesh stays aligned under shock loads. Housings are machined on CNC centres to keep bore alignment within tolerance, and each unit is pressure tested for leaks.
| Part Number | CAT M315D |
| Part Name | Swing Gearbox |
| Compatible Brand | Caterpillar |
| Applicable Models | CAT M315D |
| Application | Excavator swing gearbox in the upper structure swing circuit |
| Material | Cast iron housing with hardened alloy steel gear set |
| Product Color | Industrial grey / OEM color |
| Working Temperature | -25°C~+80°C |
| Key Function | Turns motor torque into controlled swing rotation |
| Condition | 100% New |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
 | Double-Lip Sealing A double-lip output seal plus O-ring joints keep abrasive dust out of the oil, the main reason reduction units fail early on demolition and quarry work. |
 | Bolt-On Fitment Mounting pattern, output spline and overall envelope follow the original unit, so the assembly installs with the existing bolts, hoses and guards. |
 | Hardened Internals Gears and shafts are case hardened and ground, giving a tooth surface that resists pitting under the shock loads typical of excavator travel and swing duty. |
 | Rigid Cast Housing The ring gear and bearing bores sit in one casting, holding bore alignment under load so the gear mesh does not walk out of position. |
Q: What usually causes these reduction units to fail?
A: Contaminated oil and lost bearing preload. Once dust enters through a worn seal, the bearings loosen, the gear mesh misaligns and the unit starts to whine and overheat within a few hundred hours.
Q: Do I need to adjust backlash after fitting?
A: No. Backlash and bearing preload are set at assembly. Fit the unit, fill with the specified oil grade, and check for leaks after the first few hours of operation.
Q: Is this a complete assembly or just the gear set?
A: It is supplied as a complete reduction assembly - housing, ring gear, planet gears, carriers, bearings, seals and output shaft - so nothing has to be transferred from the old unit.
Q: How do I confirm this CAT M315D unit fits my machine?
A: Compare the mounting bolt pattern, the output spline and the overall height against the unit on your machine, and check the model plate. If the numbers differ, send us a photo of the plate and we will confirm the correct variant.
Q: Which oil should I use after installation?
A: Use the grade listed in the machine service manual for the final drive or swing reduction. Overfilling causes heat; underfilling causes immediate bearing damage, so fill to the level plug.
Q: Can this unit be used as an upgrade on an older machine?
A: Where the mounting pattern and spline match, the later specification can be fitted to earlier machines. Confirm the interface dimensions with us before ordering.
Q: Why Choose RITO?
A: Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
RITO Excavator Stick Cylinder is built for ZX120, ZX200, ZX210, EX200-1, and 320CLZBYG. For distributors and agents: high interchangeability reduces inventory complexity. Mining customers benefit from reinforced sealing and shock resistance, lowering downtime and maintenance costs.
View More
This RITO 527-0741 527-0742 Hydraulic Pump Coupling Hub is a key transmission component for Caterpillar CAT 336GC and 336D excavators, designed to connect the engine and hydraulic pump with stable torque transfer. Featuring a 15-tooth flange structure, it ensures precise alignment, smooth power delivery, and reliable operation in demanding construction environments.
View More
This RITO 124-1607-OT Hydraulic Oil Cooler is a key cooling component for Caterpillar CAT 320C, 320D, 325D, and 330D excavators, designed to effectively dissipate heat from hydraulic oil and maintain optimal system temperature. It ensures stable oil viscosity, protects internal components, and supports reliable operation in demanding construction environments.
View More
This RITO 234-4440 Swivel Joint (Rotary Union) is a critical hydraulic component for Caterpillar CAT 336D, 325D, and 330D excavators, designed to transfer hydraulic oil between the upper structure and undercarriage during continuous rotation. It ensures stable oil flow to travel motors, maintaining smooth operation and reliable performance in construction environments.
View More
Hydraulic lag and erratic pressure in CAT excavators often signal a failing proportional valve, causing costly site delays. The 585-9230 eliminates these inefficiencies. Precision-engineered for mining and heavy construction, it prevents system overheating and jerky boom movements.
View More
Hydraulic lag and erratic pressure in CAT excavators often signal a failing proportional valve, causing costly site delays. The 585-9230 eliminates these inefficiencies. Precision-engineered for mining and heavy construction, it prevents system overheating and jerky boom movements.
View More
The RITO Excavator Coil Spring 179-6916-Y is designed for heavy-duty applications in CAT excavators, offering reliable and long-lasting performance in demanding work environments. This high-quality spring ensures consistent and efficient load-bearing capability, reducing wear and tear on critical excavator components. The 179-6916-Y is essential for maintaining optimal machine performance in industries such as construction and mining. By minimizing downtime and maintenance costs, this coil spring enhances productivity and contributes to the long-term durability of your fleet. Designed for seamless compatibility with various CAT excavator models, it provides an ideal replacement solution for wholesale distributors and agents.
View More
Unstable fan speeds and hydraulic overheating often stem from inefficient pump pressure. In grueling mining sites, a failing fan pump leads to engine derating and massive downtime. The 291-0061 solves these thermal inconsistencies, preventing the costly "cascading failures" that plague heavy excavator fleets.
View MoreLeave A Message
Scan to wechat :
