Boom lift force dropping or hydraulic oil weeping from the rod on your XE370C? A worn 803007118 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full XE370-series boom lift and clean, seal-tight operation.
Item NO.:
803007118 / 80300712803007118 Hydraulic Boom Cylinder Assembly for XCMG XE370C excavators. Heavy-duty double-acting boom cylinder with chrome-plated precision rod and a honed bore produced to OEM specification. Chrome layer thickness, honing surface finish and the multi-layer piston seal assembly are matched to the XE370-class lifting duty cycle so the new cylinder delivers original boom holding force and cycle time from installation.
| Part Number | 803007118 / 803007121 |
|---|---|
| Part Name | Hydraulic Boom Cylinder Assembly |
| Compatible Brand | XCMG |
| Applicable Models | XE370C Excavator |
| Application | Main boom lift hydraulic cylinder for XCMG XE370-class excavators |
| Material | High-strength steel body, chrome-plated precision rod |
| Product Color | Yellow or industrial finish |
| Working Temperature | -25°C~+80°C |
| Key Function | Provides hydraulic boom lifting and holding force for XE370-series excavator work cycles |
| Condition | 100% New Aftermarket OEM Quality |
| Packaging | Wooden Case Reinforced Carton Neutral Packing Customized Box |
Rod chrome layer thickness and adhesion matched to XE370-series OEM specification, providing the hardness and corrosion resistance that determines boom cylinder seal service life.
Bore honed to OEM surface finish and dimensional tolerance for correct piston seal contact and low internal bypass at full XE370 working pressure.
803007118 covers the boom cylinder specification across the listed XCMG XE370-class models, keeping fleets on one interchangeable replacement.
Rod and piston seal assembly rated for XE370 maximum boom pressure, with buffer seals that protect the primary rod seal from pressure spikes during heavy lifts.
FAQ
Q: How do I tell if the 803007118 boom cylinder has internal bypass or rod seal leakage?
A: External leakage is visible at the rod seal. Internal bypass causes slow boom drift when held stationary under load without visible external oil. Hold the boom at mid-stroke and watch for downward drift over 60 seconds.
Q: Can I replace only the seal kit in the 803007118 cylinder?
A: If the rod chrome is undamaged and the bore is within specification, a seal kit repair is economical. Replace the full cylinder if the rod shows pitting, score marks or chrome delamination that would cut the new seals immediately.
Q: What bleeding procedure is needed after fitting 803007118?
A: Cycle the boom slowly through full extension and retraction five times at low engine speed before applying full load. This purges air and seats the seal assembly before high-pressure operation.
Q: How to confirm 803007118 is correct for my XE370?
A: Match the existing cylinder part number against 803007118 and confirm the machine model is one of: XE370C. Provide the machine serial number for cross-reference confirmation.
Q: What quality options are available?
A: We provide original, OEM and high-quality aftermarket versions with stable supply capability.
Q:Why Choose RITO?
A:Listed Factory
Stable&Reliable Quality
OEM Factory for Chinese Top Excavator Brands
Supplier to Fortune 500 Companies
Bucket crowd force weak or cylinder rod leaking on your XE215D? A worn 803083610 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full XE215-series bucket crowd force and clean seal operation.
View More
Bucket crowd force weak or cylinder rod leaking on your XE215C? A worn 803007160 bucket cylinder allows internal piston bypass to cut crowd force below what the machine needs for hard material penetration, while rod seal wear causes external leakage that contaminates the work area. RITO supplies this heavy-duty replacement bucket cylinder to restore full XE215-series bucket crowd force and clean seal operation.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your XE215D? A worn 803085645 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full XE215-series boom lift and clean, seal-tight operation.
View More
Arm crowd slow or rod seal weeping on your XE215D? A worn 803083611 arm cylinder loses piston seal integrity and drops arm crowing force below what the machine needs for hard digging, while a scored rod seal leaks hydraulic oil across the cylinder head. RITO supplies this heavy-duty replacement arm cylinder to restore full XE215-series arm crowd force and clean, seal-tight operation.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your XE215C? A worn 803007157 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full XE215-series boom lift and clean, seal-tight operation.
View More
Arm crowd slow or rod seal weeping on your XE215C? A worn 803007159 arm cylinder loses piston seal integrity and drops arm crowing force below what the machine needs for hard digging, while a scored rod seal leaks hydraulic oil across the cylinder head. RITO supplies this heavy-duty replacement arm cylinder to restore full XE215-series arm crowd force and clean, seal-tight operation.
View More
Boom lift force dropping or hydraulic oil weeping from the rod on your SC360-8? A worn 36-52-010000 boom cylinder lets internal piston bypass bleed away lift force until the machine can no longer hold a loaded boom, while a scored rod seal leaks oil across the cylinder head. RITO supplies this heavy-duty replacement boom cylinder to restore full SC360-series boom lift and clean, seal-tight operation.
View More
Arm crowd slow or rod seal weeping on your SC360-8? A worn 36-52-030000 arm cylinder loses piston seal integrity and drops arm crowing force below what the machine needs for hard digging, while a scored rod seal leaks hydraulic oil across the cylinder head. RITO supplies this heavy-duty replacement arm cylinder to restore full SC360-series arm crowd force and clean, seal-tight operation.
View MoreLeave A Message
Scan to wechat :
